Renewable Design for Multi-Layer Stainless Steel Frame Filter - K series depth filter sheets for Viscous Liquid – Great Wall
Renewable Design for Multi-Layer Stainless Steel Frame Filter - K series depth filter sheets for Viscous Liquid – Great Wall Detail:
Depth Filter Sheets Specific Advantages
- High dirt holding capacity for economic filtration
- Differentiated fiber and cavity structure (internal surface area) for the widest range of applications and operating conditions
- The ideal combination of filtration
- Active and adsorptive properties ensures maximum safety
- Very pure raw materials and therefore minimum influence on filtrates
- Comprehensive quality assurance for all raw and auxiliary materials and intensive in process controls ensure consistent quality of the finished products
Depth Filter Sheets Applications:
Polishing Filtration
Clarifying filtration
Coarse filtration
K series depth filter sheets’ high dirt holding capacity for gel-like impurities is specifically designed for the filtration of highly viscous liquids.
Retention of activated charcoal particles, polishing filtration of viscose solution, paraffin wax, solvents, ointment bases, resin solutions, paints, inks, glue, biodiesel, fine/specialty chemicals, cosmetics, extracts, gelatin, high viscosity solutions etc.
Depth Filter Sheets Main Constituents
Great Wall K series depth filter medium is made only of high purity cellulose materials.
Relative Retention Rating
*These figures have been determined in accordance with in-house test methods.
*Effective removal performance of filter sheets is dependent on process conditions.
Depth Filter Sheets Physical Data
This information is intended as a guideline for the selection of Great Wall depth filter sheets.
| Model | Mass per UnitArea (g/m2) | Flow Time (s) ① | Thickness (mm) | Nominal retention rate (μm) | Water permeability ②(L/m²/min△=100kPa） | Dry Bursting Strength (kPa≥) | Ash content % |
| SCK-111 | 650-850 | 2″-8″ | 3.4-4.0 | 90-111 | 18600-22300 | 200 | 1 |
| SCK-112 | 350-550 | 5″-20″ | 1.8-2.2 | 85-100 | 12900-17730 | 150 | 1 |
①Flow time is a time indicator used to evaluate the filtering accuracy of the filter sheets. It is equal to the time it takes for 50 ml of distilled water to pass 10 cm2 of filter sheets under the conditions of 3 kPa pressure and 25℃.
②The permeability was measured under test conditions with clean water at 25℃ (77°F) and 100kPa, 1bar (△14.5psi) pressure.
These figures have been determined in accordance with in-house test methods and the methods of the Chinese National Standard. The water throughput is a laboratory value characterizing the different Great Wall depth filter sheets. It is not the recommended flow rate.
Contact us for more information, we will provide you better products and best service .
Product detail pictures:
Related Product Guide:
All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for Renewable Design for Multi-Layer Stainless Steel Frame Filter - K series depth filter sheets for Viscous Liquid – Great Wall , The product will supply to all over the world, such as: Italy, France, Karachi, We have advanced production technology, and pursuit innovative in products. At the same time, the good service has enhanced the good reputation. We believe that as long as you understand our product, you must be willing to become partners with us. Looking forward to your inquiry.
By Amber from New York - 2017.04.28 15:45
High Quality, High Efficiency, Creative and Integrity, worth having long-term cooperation! Looking forward to the future cooperation!
By Polly from St. Petersburg - 2018.03.03 13:09
Related PRODUCTS
