Polishing Filtration
Clarifying filtration
Coarse filtration
K series depth filter sheets’ high dirt holding capacity for gel-like impurities is specifically designed for the filtration of highly viscous liquids.
Retention of activated charcoal particles, polishing filtration of viscose solution, paraffin wax, solvents, ointment bases, resin solutions, paints, inks, glue, biodiesel, fine/specialty chemicals, cosmetics, extracts, gelatin, high viscosity solutions etc.
Great Wall K series depth filter medium is made only of high purity cellulose materials.
*These figures have been determined in accordance with in-house test methods.
*Effective removal performance of filter sheets is dependent on process conditions.
This information is intended as a guideline for the selection of Great Wall depth filter sheets.
Model | Mass per UnitArea (g/m2) | Flow Time (s) ① | Thickness (mm) | Nominal retention rate (μm) | Water permeability ②(L/m²/min△=100kPa) | Dry Bursting Strength (kPa≥) | Ash content % |
SCK-111 | 650-850 | 2″-8″ | 3.4-4.0 | 90-111 | 18600-22300 | 200 | 1 |
SCK-112 | 350-550 | 5″-20″ | 1.8-2.2 | 85-100 | 12900-17730 | 150 | 1 |
①Flow time is a time indicator used to evaluate the filtering accuracy of the filter sheets. It is equal to the time it takes for 50 ml of distilled water to pass 10 cm2 of filter sheets under the conditions of 3 kPa pressure and 25℃.
②The permeability was measured under test conditions with clean water at 25℃ (77°F) and 100kPa, 1bar (△14.5psi) pressure.
These figures have been determined in accordance with in-house test methods and the methods of the Chinese National Standard. The water throughput is a laboratory value characterizing the different Great Wall depth filter sheets. It is not the recommended flow rate.
Contact us for more information, we will provide you better products and best service .